Office furniture created from reclaimed material

This is the first section of our work surface. It is made entirely of
reclaimed deck material.

A relative of the Lovely Shane and I recently had a deck rebuilt. Some of the old lumber was rotted,but much of it was in pretty good shape. We obtained this material at no cost, In fact the home owners were happy to have it hauled away,

We have been planning to add some shelving and built-in work surfaces to our home office for some time now. I saw the material we obtained from the old deck as perfect for the job.

We had to first remove a lot of old nails. I think I got at least five pounds of nails out of that material.

After removing the nails, I decided to try to build the first work surface.

I then ran the material through a planer to get it smoother. After running it through the planer. I ripped and cut the material to size. I planned the job in a fashion to avoid too many rips or cuts. I did have to rip some pieces on the table saw to make the trim that runs around the outer edge of the work surface.

This is the work surface during the application of the finish. Notice
the brackets behind it

I then built the first work surface and the brackets that I would utilize to attach the work surface to the wall in our office.

After the work surface and the supporting brackets were assembled, I sanded everything to prepare for the finish.

For a finish I used several coats of minwax stain followed by three coats of glossy polyurethane. After all this dried out, we installed the finished unit in the office.

The entire job took about a week (working about an hour each day). The most time consuming part was running the material through the planer.

Aside from the material that we obtained from the old deck, I used deck screws (as fasteners), about a pint of stain and less than a pint of polyurethane. The cost of the material was very little (less than $40.00).

These are the support brackets that hold the work surface
to the wall.

I am looking forward to finishing the office project with this reclaimed deck wood. We plan to build two more work surfaces and a few shelves. It looks like we will have plenty of the reclaimed material to do the job.

We will keep you updated on the progress.

We are building unique pieces that fit the decor of our house (a small house that is over 100 years old). It is unique and is customized to our needs.

We can do this for you as well. If you are interested in getting our help on your project, please contact us! Use this link to our website and complete this form. If you prefer you may contact me directly by phone at 678-702-4791.
Please do not call after 9:00 pm (EST)

Till Next Time

-William

Creating furniture from re-purposed material

The Lovely Shane and I like to re-purpose material that we already have for projects that we do around the house. Our latest project of this type is a headboard for our bed. It may not be entirely obvious in the pictures here but, the head board is made from an old interior wooden door that we salvaged from a job that we were working on for a customer. The old door was removed from a rental house in a remodeling project.

We used some lumber scraps that we had in the shop to frame up the headboard and attach it to the bed frame. The door is trimmed with some scrap crown molding that we had left over from a job. The shelving on the top is made from scrap left over from an old shelving project.

The headboard ended up working very well with the somewhat nautical theme of our bedroom. I am thinking of also extending more shelving on each side of the headboard. We have limited storage space in our bedroom and this may be a good addition. I will keep you posted.

If you have a project that you would like us to help you with, please contact us. For projects like the one mentioned here, click here for a form to use in telling us about your needs.

We look forward to helping you soon!

Till next time 

-William Moore

The importance of the proper fastener. Or, why we use screws most of the time.

The type of fastener that is used on your job is a very important consideration. Of course the proper type of fastener is very much dependent upon the work that is at hand. 

I generally prefer to use screws as opposed to nails. This is because, in many applications, the nail tends to "let go" over time. This is particularly true in cases when wood is being fastened to wood in

an outdoor setting. For instance we never use nails to attach decking, attach parts to wood fences or anything that we do outdoors. Even when mounting rain gutters to the side of your roof, it is much preferable to use screws rather than the long wood nails. If you have ever seen gutters pulling away from a house, it is most likely due to the use of nails as a fastener.

There are instances however where nails are the appropriate choice over screws. One of those instances is when trim work needs to be attached. I use brads applied with a nail gun in that case.

The porch swings that we build are generally far superior to those of our competition. One of the main reasons is that all the fasteners are deck screws. Our porch swings will never separate due to the use of a nail instead of a screw.

I have repaired many wood fences for customers where the real reason for the failure was the use of cheap nails rather than deck screws. This is particularly true in the case of picket fences. When nails are used it is not a matter of if the picket will pull away, it is a matter of when.

We also use screws when installing drywall. We find that screws are far superior for us. We do not have to worry about marring up the drywall with  the hammer and it is much easier to make small adjustments in the level of the drywall (provided the leveling is done before taping and finishing). Screws also make it much easier to ensure that the drywall sheet is fastened tight against the studs. A countersunk screw is mush easier to tape and finish over than nails.

When you choose Moore Services for Your Money to do handyman work for you around your house, please rest assured that we will choose and use the best available fastener for the job at hand.

We will treat you in a manner in which we would like to be treated. This is called the Golden Rule and it is the cornerstone of our business.

Till Next Time

William Moore
Co-Owner and Founder
Moore Services for Your Money
mooresvs.com
678-702-4791

New Website

Hello-

I have wanted to obtain an Internet Domain Name for our business for a long time. I finally did that!

We now own the domain mooresvs.com . We have created a website that represents all of our service offerings at www.mooresvs.com.

I am also pleased to announce that my wife, the lovely and beautiful Shane, is now joining me full time in this business! She is expanding our cleaning services offering. In addition to commercial cleaning, we now also offer residential cleaning services!

We will continue to offer all of the other services that we have always offered. We will be doing business under the name of " Moore Services for Your Money". We have done this in an effort to better consolidate our service offerings in one place.

This blog will continue to operate to provide our customers and the community with information about Lawn Maintenance and Handyman topics in a blog format. I intend to update it more frequently in the future. Recent health issues have prevented me from updating the blog as often as I would have liked. I am feeling much better now!

We look forward to working with you soon!

Till Next Time
-William-