Why cheapest is not always best when choosing a lawn mowing provider.

I have been doing lawn maintenance professionally for over a decade now. I have learned a few things over the years. I no longer worry about providing my services at the absolute lowest price. I can not provide the level of service that my customer's deserve and expect and also provide the lowest price in town. 

There are many things to consider when choosing someone to mow your lawn. As with anything else, you should resist the temptation to hire someone based solely upon price.

Since going into business for myself, I have insisted that my company operate by one rule. That rule is that we will treat the customer the way that we would want to be treated. When I hire a company to do work at my home, I insist upon, and expect the highest quality work possible. I insist upon honesty, integrity, punctuality and professionalism. My customers should expect no less from me.

When we (Moore Services for Your Money) make an appointment with you (to do a job or to provide an estimate) we show up when we told you we would show up. You, as a customer can count on it. Sadly, this is not the case with most of the very low cost providers.

Life is not perfect, however, and things do not always go the way that we plan. Sometimes, regardless of how diligent we may be, we run into problems. Occasionally equipment fails, jobs take longer than expected, etc. and this causes us to run a little later than expected. If this happens, we never leave you wondering what has happened to us. We contact you as soon as possible. Sadly, this is not always the case with our low cost competition.

This is our Gravely professional zero turn mower.
As I write this, it is awaiting repair. We do have a couple of
backups for this mower so our customers have no indication that
this mower is out of service.

Equipment maintenance is time consuming and sometimes expensive. This is something that we understand. Our equipment is in the best possible working order. The blades on the mowers are sharp (we sharpen them about once ever couple of weeks (minimum) during mowing season. Unfortunately this is almost never the case with low cost providers.

We have literally decades of experience doing professional lawn service. We know how to do the job properly. Properly does not always mean really fast. We take the time to do the job properly. We do not have 30 other yards to do the same day we are at your house. We schedule the jobs so that we have plenty of time to do the work properly even if we run into some sort of unexpected delay. Unfortunately this is simply never the case with low cost providers. You see, in order to make any profit at all, they must do as much volume as possible. We stress quality over quantity. Our reputation rests upon the quality of our work and the satisfaction of our repeat customers. We are not in a race here.

This is our trailer getting the springs replaced. This happened a few
years ago. The phone number on the trailer is from when we
operated in Tampa, FL. We no longer service that area.

We are not just a guy who bought a lawn mower, a pickup truck, a string trimmer and maybe a blower and started mowing yards for the public. The most important equipment that we own all have back-up plans in place in case they have to be out of service. This is absolutely necessary in order for us to provide the reliability that our customer's should expect. This is almost never the case with the low cost providers.

As far as I know, we are the only provider in town that cross-cuts yards whenever possible. What I mean is that if I cut the yard from left to right, I then cut it from front to back. This makes a much nicer cut and avoids any missed areas. It also takes a little more time. We feel like it is worth the extra time.

So, if you are looking for the absolutely lowest price in town and that is your only consideration, do yourself a favor, don't contact us. We will likely not be the lowest priced guy in town. We will offer you a very fair price for the best and most reliable service available. If that interests you and you are in Fayette County, Georgia or some of the surrounding area, please contact me for an estimate!

By the way, we are Fayette County natives. We know the area very well. We grew up here. I am a 1983 graduate of Fayette County High School. My family goes back several generations in this area. I can tell you all sorts of history about the area. If you live in Fayette County, why not do business with the natives? There are not that many of us left!

Till next time

-William Moore

Moore Services for Your Money
678-702-4791
mooresvs.com

A few pictures of some of our work:

Important things to consider when getting estimates.

We are happy to provide our customers with no cost estimates for the services that we provide. However, when you are gathering estimates, it is important that you understand the scope of the work and the details of the estimate. This is of particular importance when you are using on-line services such as porch.com, Angie's list, yelp, craigslist, etc.

There is a prevalence today of services that provide a customer with several estimates for a job. The estimates come from several contractors. Please be cautious when using these services to get quotes. Many of these services provide very little job information to the contractors. It is sometimes extremely difficult to accurately bid a job under these circumstances. If the contractor is not allowed to submit questions about the job before providing the estimate, this should be a "red flag" for you. Another problem with many of these services is that the contractor is paying for these "leads". You are not necessarily getting the best contractors this way. You are getting the contractors who have paid for the lead.  Also beware of services, such as Angie's List that rate contractors. Understand that all the contractors who are "rated" high are paying for that privilege.  The best way to find a quality contractor is to ask people for whom he has worked.

Walter White always provides appropriate measurements with
quotation requests :). 

As a service provider, it is always difficult to estimate a job based simply upon a description in an email. Pictures and measurements are essential. Ideally, the contractor should visit the job site to gather the information to more accurately compile an estimate. However, this is not always practical.

All of our preliminary estimates detail the work that is to be done. Make sure that each vendor who provides you with an estimate also provides sufficient detail of the work to be done. Otherwise, you are likely not really comparing estimates for the same work.

When comparing estimates, it is essential that each potential contractor is bidding on the same scope

This is a picture from a job that we recently quoted. The drywall
was cut out by a plumber to access plumbing that needed repair. We did not
simply quote the repair, we also quoted the finishing and painting.

of work. This sounds easy but it is not always as simple as one would think. For instance, when we estimate a drywall repair, we always estimate it as a finished job. In other words, we include the taping, finishing, sanding and painting/texturing. We have found that some of our competitors simply quote replacing the drywall. Sometimes this makes our estimate look expensive until you actually understand the scope of the work. We quote it this way because this is what most customer's really expect. Most customers want the finished job to look like it did before the damage occurred. If this is not what you want, we will be happy to simply replace the drywall but we need to know this in order to accurately estimate the job.

It is also important that you verify that the quality of the material is consistent from one estimate to the next. For instance, when we repair wood fences and gates, we never use nails as fasteners. We always utilize wood screws. Depending upon the size of the job this may add cost. We also always use only treated wood on outdoor applications. This is the proper way to do the job but, it adds cost.

When we do interior or exterior painting, we use rollers and brushes. We do not spray, We find that this gives us a better finished product. Because of this, our quotes are sometimes higher than those of contractors who spray.

Read the estimates closely when comparing.

I suppose the real point here is that you should always make sure that the quote covers the work that you want to have done. In addition to that make sure that the method used to do the work is of an acceptable quality. Generally, if an estimate seems too good to be true, it is. You will ultimately not be happy with the work if you do not understand the work that is to be done.

Also, I strongly recommend that you understand how additional costs will be handled. An estimate is just an estimate. Sometimes costs fluctuate due to circumstances that are beyond the contractor's immediate control (i.e. rising material costs, damage that was previously hidden, etc.) We immediately notify the customer before proceeding if the cost goes up. If the customer makes changes to the job we require a change order that details the change in work scope. It is always a great idea to minimize surprises. Make sure that you and your contractor agree on what will be done if changes are needed.

I hope this post has helped you to more accurately compare estimates.

Please contact us at any time if you need an estimate!

Till Next Time

William

                      

How to watch HD television programming without monthly payments.

This is not HD TV but, this is what many folks think of
when they think of over the air antenna television

Many people today are under the impression that in order to watch local television programming they must pay a monthly fee.  The monthly fees are generally paid to a cable provider or a satellite TV provider.

Since the advent of television, programming has continued to be available over the air at no cost. In the days before High Definition digital television and before cable television, it was common to receive all of your programming over the air at no cost.

The programming was received using an antenna. Some antennas were internal to the television. Some antennas were set top antennas. Some antennas were outside the house or in the attic. The point is that all programming was relieved using an antenna.

This is a 1950s era outdoor (VHF only) Television Antenna

Before the advent of digital television signal, all of the signals were analog. Analog used a much wider bandwidth and was prone to snowy and fuzzy images if your television was not near enough to the transmitter. Because the bandwidth was so wide there were not many channels from which to choose. The wide bandwidth, the power required to transmit the signal, and the expense of the transmitting equipment limited the choices of channels. This was especially true in areas of the country with smaller populations.

Because of this, when most folks think of antenna television, they remember the small choice of channels (when I was growing up in Fayette County Georgia, we had 4 channels).

However, over the years, this changed. In the beginning, we only had VHF channels. These were numbered 2-13. Later on we added UHF which gave us channels 14-69. Even with the advent of UHF, in Fayette County, I could only get about 2 or maybe 3 additional channels when I was growing up.

To get decent reception, many people had to erect large outdoor antennas with rotators that allowed you to move the antenna to get better reception on certain channels. Each channel usually required that the antenna be oriented in a slightly different direction for optimum reception.

This is how over the air television remained for decades.

The resolution and screen size of television sets improved drastically over those decades. But, for many years, the tuners remained essentially the same. Which meant that we had the same fuzzy pictures and limited channel selection on over the air television.

This is a very old, low power analog broadcast
transmitter

Eventually digital television transmission began. Because the signal was now digital it required much less bandwidth. A digital signal is basically (simplified) a series of ones and zeros. Therefore, there is no more snowy image. The image is fundamentally either present or absent. This is actually a gross over simplification of the technology but, it is essentially accurate in the context of this discussion.

The broadcasters had a lot of money tied up in analog equipment. There were also a very large number of televisions installed in people's homes that were not capable of receiving a digital signal. For those reasons (and probably others of which I am unaware), broadcasters were not quick about implementing digital transmitters.


It happened that the FCC needed to free up some of the bandwidth that was allocated to television transmission. The old analog equipment was not making very efficient use of the bandwidth by modern standards.

This is a low power high definition broadcast transmitter.
Modern broadcasters use something similar to
this with the appropriate power amplifier

Therefore, the FCC forced the broadcasters to convert to digital transmission. The digital transmission has a  variety of advantages. The transmitting equipment makes much more efficient use of bandwidth. This allows broadcasters to offer many additional channels in a cost efficient manner.

At the moment, at my home in Fayette County, Georgia I receive over 30 digital channels and pay no monthly fee at all.

There are some drawbacks. I do have to use an antenna. I built my own antenna from components that I had in my shop. I have an extensive background in electronics and will be happy to build an antenna for you as well!

I mentioned that there are not snowy images any longer. However, if you are on the fringe of the broadcaster's coverage area, you may experience pixelization. In other words the signal will sometimes go in and out. But the picture is many orders of magnitude better than the old analog signal. I get images that are usually better than that of the local cable television providers.

This is the top view of the prototype that I built for my parents.
It is sitting outside on top of my smoker for testing. It was
eventually installed in the attic.

I am working on prototypes of an antenna that I am planning to begin offering to customers. I have one of these mounted outside my house. The antenna in the pictures here is one that I built for my parents who live next door to me. This antenna is only about a foot long. I mounted it in their attic. I also installed a small amplifier between the antenna and the television. My parents get about 30 channels with this small attic mounted antenna.

This is the front view of the prototype. The finished product will
look prettier and will probably not have all the electrical tape

You may have noticed that televisions today no longer have the built in antennas. They all require external antennas. The antenna will have to be attached outside the television. Because of the way modern houses are designed, it is sometimes difficult to determine the proper placement of the antenna. There are also a wide variety of antenna choices.

If you have more than one television, as most homes do today, you will likely want a central antenna for all the televisions. These do not have to be outdoor antennas. Many times they can be installed in the attic or elsewhere in the home.

One of our antennas may be right for you. Alternatively a combination of our antenna and an inexpensive amplifier may be the correct solution. Whatever works best at your home we are happy to help.

We at Moore Services for Your Money are happy to work with you on designing an appropriate antenna system for your location so that you do not have to pay the monthly cable television fees simply to get local television.

Please contact us to arrange a consultation and estimate. You may click here and use this form to request an estimate or consultation. You may also call 678-702-4791.

Till next time

-William

William Moore
Moore Services for Your Money
678-702-4791
mooresvs.com

Office furniture created from reclaimed material

This is the first section of our work surface. It is made entirely of
reclaimed deck material.

A relative of the Lovely Shane and I recently had a deck rebuilt. Some of the old lumber was rotted,but much of it was in pretty good shape. We obtained this material at no cost, In fact the home owners were happy to have it hauled away,

We have been planning to add some shelving and built-in work surfaces to our home office for some time now. I saw the material we obtained from the old deck as perfect for the job.

We had to first remove a lot of old nails. I think I got at least five pounds of nails out of that material.

After removing the nails, I decided to try to build the first work surface.

I then ran the material through a planer to get it smoother. After running it through the planer. I ripped and cut the material to size. I planned the job in a fashion to avoid too many rips or cuts. I did have to rip some pieces on the table saw to make the trim that runs around the outer edge of the work surface.

This is the work surface during the application of the finish. Notice
the brackets behind it

I then built the first work surface and the brackets that I would utilize to attach the work surface to the wall in our office.

After the work surface and the supporting brackets were assembled, I sanded everything to prepare for the finish.

For a finish I used several coats of minwax stain followed by three coats of glossy polyurethane. After all this dried out, we installed the finished unit in the office.

The entire job took about a week (working about an hour each day). The most time consuming part was running the material through the planer.

Aside from the material that we obtained from the old deck, I used deck screws (as fasteners), about a pint of stain and less than a pint of polyurethane. The cost of the material was very little (less than $40.00).

These are the support brackets that hold the work surface
to the wall.

I am looking forward to finishing the office project with this reclaimed deck wood. We plan to build two more work surfaces and a few shelves. It looks like we will have plenty of the reclaimed material to do the job.

We will keep you updated on the progress.

We are building unique pieces that fit the decor of our house (a small house that is over 100 years old). It is unique and is customized to our needs.

We can do this for you as well. If you are interested in getting our help on your project, please contact us! Use this link to our website and complete this form. If you prefer you may contact me directly by phone at 678-702-4791.
Please do not call after 9:00 pm (EST)

Till Next Time

-William

Creating furniture from re-purposed material

The Lovely Shane and I like to re-purpose material that we already have for projects that we do around the house. Our latest project of this type is a headboard for our bed. It may not be entirely obvious in the pictures here but, the head board is made from an old interior wooden door that we salvaged from a job that we were working on for a customer. The old door was removed from a rental house in a remodeling project.

We used some lumber scraps that we had in the shop to frame up the headboard and attach it to the bed frame. The door is trimmed with some scrap crown molding that we had left over from a job. The shelving on the top is made from scrap left over from an old shelving project.

The headboard ended up working very well with the somewhat nautical theme of our bedroom. I am thinking of also extending more shelving on each side of the headboard. We have limited storage space in our bedroom and this may be a good addition. I will keep you posted.

If you have a project that you would like us to help you with, please contact us. For projects like the one mentioned here, click here for a form to use in telling us about your needs.

We look forward to helping you soon!

Till next time 

-William Moore

The importance of the proper fastener. Or, why we use screws most of the time.

The type of fastener that is used on your job is a very important consideration. Of course the proper type of fastener is very much dependent upon the work that is at hand. 

I generally prefer to use screws as opposed to nails. This is because, in many applications, the nail tends to "let go" over time. This is particularly true in cases when wood is being fastened to wood in

an outdoor setting. For instance we never use nails to attach decking, attach parts to wood fences or anything that we do outdoors. Even when mounting rain gutters to the side of your roof, it is much preferable to use screws rather than the long wood nails. If you have ever seen gutters pulling away from a house, it is most likely due to the use of nails as a fastener.

There are instances however where nails are the appropriate choice over screws. One of those instances is when trim work needs to be attached. I use brads applied with a nail gun in that case.

The porch swings that we build are generally far superior to those of our competition. One of the main reasons is that all the fasteners are deck screws. Our porch swings will never separate due to the use of a nail instead of a screw.

I have repaired many wood fences for customers where the real reason for the failure was the use of cheap nails rather than deck screws. This is particularly true in the case of picket fences. When nails are used it is not a matter of if the picket will pull away, it is a matter of when.

We also use screws when installing drywall. We find that screws are far superior for us. We do not have to worry about marring up the drywall with  the hammer and it is much easier to make small adjustments in the level of the drywall (provided the leveling is done before taping and finishing). Screws also make it much easier to ensure that the drywall sheet is fastened tight against the studs. A countersunk screw is mush easier to tape and finish over than nails.

When you choose Moore Services for Your Money to do handyman work for you around your house, please rest assured that we will choose and use the best available fastener for the job at hand.

We will treat you in a manner in which we would like to be treated. This is called the Golden Rule and it is the cornerstone of our business.

Till Next Time

William Moore
Co-Owner and Founder
Moore Services for Your Money
mooresvs.com
678-702-4791

New Website

Hello-

I have wanted to obtain an Internet Domain Name for our business for a long time. I finally did that!

We now own the domain mooresvs.com . We have created a website that represents all of our service offerings at www.mooresvs.com.

I am also pleased to announce that my wife, the lovely and beautiful Shane, is now joining me full time in this business! She is expanding our cleaning services offering. In addition to commercial cleaning, we now also offer residential cleaning services!

We will continue to offer all of the other services that we have always offered. We will be doing business under the name of " Moore Services for Your Money". We have done this in an effort to better consolidate our service offerings in one place.

This blog will continue to operate to provide our customers and the community with information about Lawn Maintenance and Handyman topics in a blog format. I intend to update it more frequently in the future. Recent health issues have prevented me from updating the blog as often as I would have liked. I am feeling much better now!

We look forward to working with you soon!

Till Next Time
-William-

Installation of Fence Panels on a slope

A recent installation of panel fencing on a slope.
 We utilized the, so called, sloped method.
The panels here are 3ft. tall wood composite. 

Fence Panels on a Slope:

Image borrowed from Lowes.com

We occasionally install panel type fence material for customers. Recently, I have encountered some confusion regarding the installation of this type of fence on a site that has sloped ground. Therefore, I felt compelled to write this post in order to clarify the matter.

There are generally two methods that are utilized for the installation of panel picket fences on an incline (slope):

• Parallel Method

The parallel method, requires that the fence run parallel to the slope. In order for this to work, the fence must be built to conform to the slope. This presents an issue for most pre-made panel fencing material. The issue is that the panels must be disassembled  and modified in order to make them conform to the slope.

This is difficult but possible with some materials such as treated wood panels. However, other materials present a greater difficulty rendering the parallel method of installation problematic to the point of impracticality.

For example, I have found that composite wood fence panels are very difficult, if not impossible, to disassemble. the issue is that, in most cases, the pickets are attached to the rails (sometimes called runners) with long countersunk staples. The pickets are usually very brittle. Because they are brittle and attached to the rails with staples, removing them without damage is very difficult. Excerpted pressure necessary to remove the pickets from the rails will most likely break or damage the pickets.

•    Step Method

The step method requires that the fence panels be installed in such a fashion that they "step up " the slope. The panels are level but do not conform to the slope. This is, by far, the most common and generally preferred method of installing a panel type of picket fence on a sloped line.

There are limitations and trade-offs with most materials. In the case of pre-fabricated panels, the installation is less labor intensive but the panels are difficult, if not impossible to install on a slope using the parallel method.

If you do not find the aesthetics of the step method to be appealing and desire a parallel method installation on a slope, William Moore Lawn and Handyman Services very strongly recommends that you not use panels. It will be exponentially easier and ultimately more cost effective to construct the fence from individual pickets and to fabricate the rails at the jobs site.

I will be happy to answer any questions that you may have regarding this topic.

If you need a new fence and/or gate or if you have an existing fence or gate that  needs repairs please contact us at any time!

Till next time -

-William-

William Moore

Owner

William Moore Lawn and Handyman Services

678.702.4791

fayettelawnmoore@gmail.com

Sometimes a simple repair is all that is needed.... that is fine with us!

Rodent damage to basement garage door

Patch installed on Garage door (before new weather strip was installed)

 A long time customer recently called me and asked me to repair a garage door in his basement.

Some sort of critter had chewed his way under the door. There was damage to part of the bottom door panel and the weatherstrip at the bottom of the door was chewed up.

The customer was interested in a patch rather than replacing the panel on the door. The door will likely be replaced at a later time.

Completed Repair

I used sheet metal to make a patch that will be more difficult for the next critter to chew through.

I also replaced the weather stripping along the bottom of the door. Once the door is repainted, the patch will blend in quite well.

We fixed the door, hopefully eliminated further damage by the critter and provided a much lower cost solution for the customer than replacing a panel or the entire door.

We always work with our customers to achieve the desired result as cost effectively as possible.
This does not mean that we are the cheapest guys in town but, we are the most dependable and we always treat our customers as we would like to be treated. This is our golden rule.

So, please contact us if you are in need of repairs around your home.

Till next time

-William

William Moore
Owner
William Moore Lawn and Handyman Services
fayettelawnmoore@gmail.com
678-702-4791

The Walking Dead Swing

Custom Swing

During filming of the AMC show "The Walking Dead", we were hired by a local construction company, All Span Builders, to fabricate and install a custom swing. The swing was used as part of a remodel of the entrance of Hollberg's furniture store in downtown Senoia, GA.

The entrance of the store was remodeled to be used in the production of "The Walking Dead".

The swing was built to custom specifications for the remodeling project.

We can customize a swing to your specifications as well.

Please contact us at anytime for additional information.

Thank You,

William Moore
William Moore Lawn and Handyman Services
fayettelawnmoore@gmail.com
678-702-4791

Regarding confidentiality of customer information, a message from the owner:

I thought it prudent to write about an issue that has been in my thoughts a lot lately.

Lowe's has recently partnered with Porch.com. Porch.com is a marketing service. The electronic service that they provide is intended to match homeowners that are looking for home improvement contractors with contractors in the area that can do the work. It is similar to Yelp.com.

I found some of their marketing material at the Lowe's contractor desk and decided to create a profile on Porch.com for the Handyman business.

I like some things about Porch.com. The contractor can put up pictures of projects and provide a lot of information on the type of services that they provide.

However, there is one thing for which my gut feel, so to speak, was not good at all:

Porch provides a mechanism for new homeowners to discover who has worked at the address of their home. Part of this information is obtained by Porch through public record searches (i.e. building permits, etc.) I do not really have a problem with this because this is public information and can be obtained by anyone. However, Porch, very strongly encourages contractors to give them lots of information about jobs they have done, Much of the information they request is customer information that I consider confidential. They want to know how much I charged a customer for a particular job (like the projects that I post). They want to know the exact street address of the job (supposedly for the address search feature I mentioned). They do not want the customer name ( if they have the other information, I maintain that the name is easy to obtain).

In his gospel, Luke records the words of Jesus, " Therefore all things whatsoever ye would that men should do to you, do ye even so to them: for this is the law and the prophets." Sometimes we call this the golden rule. Treat others the way you would want to be treated. Well, friends, I have to tell you, if I do business with you, I really do not want you telling strangers where I live and how much I paid you for the job. As the old folks that I grew up around used to say, "It just ain't none of their business".

It might be kind of cool to find out who, in the past, did work at a house I just bought. It might be cool to find out how much the previous owners paid for a repair. However, if they wanted me to know they would have told me. I could have asked before I bought the house. And, just because a particular contractor worked at an address in the past, does not really mean that this contractor will be a good choice for a future job. It does not even mean that the contractor did the work properly the first time.

A Porch representative contacted me by phone and very strongly suggested that I disclose this sort of information about my customers. I never intended to disclose any of this information. I have a very strong information security background from my previous career as a computer network security consultant, I was curious, so I asked for documentation detailing the internal controls, if any, that Porch implements to secure the potential vulnerability of this sensitive data. This should be in their internal data security policies and procedures. I was promised this information. What I got was names of contractors who have disclosed customer information to Porch. Porch wants me to contact these contractors for testimonials regarding how great it is to disclose sensitive customer information to a marketing company like Porch. Well.... No Thanks.

So, I strongly suggest that you, as a consumer, insist that personally identifiable information about your deal with your contractor remain confidential. I often use pictures and/or descriptions of the work that I do for customers as a marketing tool. Sometimes, I will give a broad description of the geographical area of the work, i.e. North Fayette County, GA.  However, I never disclose the customers name, address, nor any details of the deal (i.e. cost, time to complete, etc.) I am proud of my work but, your confidentiality is important to me as well!

Thanks for your continued business!  All of us at William Moore Lawn and Handyman Service appreciate your business and referrals!

-William Moore
Owner
William Moore Lawn and Handyman Services
678-702-4791
fayettelawnmoore@gmail.com

Custom Shelving Units

We recently completed a job involving the design, fabrication and installation of custom shelving units. The job was done for a home owner in Fayette County. The shelves now house a collection of LPs, 45s, CDs, and video DVDs.

This blog posts details the design, fabrication and installation process used on this job.

Before hiring us, the customer had a shelving unit for CDs that did not offer enough storage capacity and was not aesthetically pleasing. There was no storage in the room for his collection of over one thousand LPs and 45s.

This before picture illustrates the need for more CD storage.

This is a before picture taken that shows more of the previous inadequate storage space.

In the case of this project, the customer had a good idea of what he wanted and provided a drawing indicating his vision for the project.

Customer's initial drawing indicating the project requirements.

After meeting with the customer, we used his drawing and our notes from the initial consultation to create preliminary drawings and a cost estimate.

 As part of the estimating process we created some very preliminary drawings for the project.

CD Unit Preliminary Drawing

DVD Unit preliminary drawing

Album Unit Preliminary Drawing

We decided that three distinct units would be designed, fabricated, and installed:

LP or Album Unit

The album unit includes adequate space to house a collection of over 1000 LPs and Albums
This unit reaches floor to ceiling. The unit is about 13 inches in depth to accommodate the depth of LPs.

There is a 2ft. wide section of shelving that accommodates 45s  this section has a 3 inch lip on the front of the shelf.

The bottom of the unit is sized to accommodate the storage of guitar amplifiers.

CD Unit

The CD unit is the largest of the three units. It is over 8 feet in length.

The bottom of the unit is sized to accommodate the storage of guitar amplifiers.

This is attached to  the DVD unit in the corner of the room 

DVD Unit

The DVD unit is the smallest of the three units. It is a little over 3 feet in length. The DVD unit attaches to the CD unit in the corner of the room

Material:

The home in which these units were installed contains some beautiful hardwood floors. All of the interior doorways are trimmed in oak. Baseboards are made of oak.  All of the doors that we saw in the home appeared to be made of solid oak. Apparently a previous owner of the house was a woodworker and put a great deal of time into the trim and doors in this house. It was therefore, our intention to compliment the beautiful woodwork in this house with our shelving units.

The units were constructed of furniture grade materials. Pine and oak were used. All highly visible parts are oak.  Minwax Golden Oak Stain was selected to compliment the shade of stain on the floor and woodwork in the room. A rich and glossy finish was attained through the careful application of high gloss spar varnish. All of the stain and varnish was rubbed into the material with cloths. The rubbing ultimately brought out the grain of the wood very nicely!

In order to maintain a built-in and formal look, the units were trimmed with oak shoe mold and crown molding was installed at the top.

These are sample pieces that were provided to the customer before we began fabrication. This was done to verify that the finish and stain shade was acceptable. The top piece is oak. The middle piece is furniture grade pine. The bottom piece is oak shoe molding.

This is hardwood paneling that is in one of the rooms of the house

This is a sample of the hardwood floor in the home.

These are some of the pieces of the album unit during the staining and finish process. The material for a particular unit was stained and finished before fabrication of the unit began. These pieces were only left in the sun long enough for the stain to dry. Any longer in the sun would have presented a risk for warping of the material. By the way, the jeep visible in the background is not for sale...just a project that we have not had time to finish yet.

This is the completed album unit in our shop. 

The completed album unit just prior to transport.

The album unit in the house. The header pieces nor the crown molding had been installed at this point.

This picture was taken during installation. The first section of the CD unit is attached to the album unit.

Here the CD unit is completely installed and the Lovely Shane makes notes regarding the upcoming DVD unit installation.

This is another view of the CD unit and Album unit during the on-site portion of the installation.

These are some of the parts of the DVD unit during the staining process at our shop.

This is a section of the hardwood backing that we used on the units. This was taken just prior to the DVD unit fabrication.

The Lovely and Awesome Shane helping with the stain application process. This picture was taken in our shop.

This is a picture of some of the crown molding during the staining process.

This is one of the header pieces for the DVD unit.

DVD unit during fabrication

This is the Lovely and Awesome Shane with our finished product. Notice that the Album unit (in front of Shane) has been stocked by the customer, with a collection of over 1000 LPs and a bunch of 45s. The CD Section is partially stocked.

The Lovely and Awesome Shane literally adds a finishing touch here.

This is a picture of the completed album unit. The shelves are loaded with LPs. Notice the second shelf from the bottom
in this picture. On the far right, just past the divider support the edge of the 45 storage area is visible.

This picture shows the corner. The DVD unit on the right is secured to the CD unit on the left. A very nice piece of oak material connects the units together leaving no visible gap.

In this picture the detail of the individual shelves is visible. The Spar Varnish gives the piece a nice, rich glossy appearance. The outer edges of the shelves are capped with oak shoe mold. The Spar Varnish  makes the piece more water resistant and easier to clean.

This picture shows the quality of the material. This is the material before the staining process has been done. The piece on the left is a 1"X 8" piece of furniture grade pine. The piece on the right is a 1"X 12" piece of furniture grade oak. Great care was taken to position and cut the pieces so that the prettiest grain was visible on the face of the finished piece.

In this picture, William is sanding a piece of oak that will become a side piece for the Album unit

In this picture, we were pre-fitting the hardwood plywood back to the album unit. The plywood at this stage is not permanently attached and has not been stained. You can clearly see the beauty of the material that we used for the back of the units in this picture.

In order to verify the fit, we borrowed a few representative pieces of the recordings that would ultimately be stored on the shelves. This is a picture of one of the LPs during the fitting process. 

We are grateful to have been given the opportunity to work on this project. We have a satisfied customer and we are really proud of the finished product.

If you have a need for customized cabinets or shelves, please contact us! We would love to do another one of these projects soon!


-William Moore
Owner

William Moore Lawn and Handyman Services
fayettelawnmoore@gmail.com
678-702-4791