Yelp

Wednesday, November 11, 2015

Creating furniture from re-purposed material


The Lovely Shane and I like to re-purpose material that we already have for projects that we do around the house. Our latest project of this type is a headboard for our bed. It may not be entirely obvious in the pictures here but, the head board is made from an old interior wooden door that we salvaged from a job that we were working on for a customer. The old door was removed from a rental house in a remodeling project.

We used some lumber scraps that we had in the shop to frame up the headboard and attach it to the bed frame. The door is trimmed with some scrap crown molding that we had left over from a job. The shelving on the top is made from scrap left over from an old shelving project.

The headboard ended up working very well with the somewhat nautical theme of our bedroom. I am thinking of also extending more shelving on each side of the headboard. We have limited storage space in our bedroom and this may be a good addition. I will keep you posted.

If you have a project that you would like us to help you with, please contact us. For projects like the one mentioned here, click here for a form to use in telling us about your needs.

We look forward to helping you soon!

Till next time 

-William Moore

Wednesday, November 4, 2015

The importance of the proper fastener. Or, why we use screws most of the time.

The type of fastener that is used on your job is a very important consideration. Of course the proper type of fastener is very much dependent upon the work that is at hand. 
I generally prefer to use screws as opposed to nails. This is because, in many applications, the nail tends to "let go" over time. This is particularly true in cases when wood is being fastened to wood in
an outdoor setting. For instance we never use nails to attach decking, attach parts to wood fences or anything that we do outdoors. Even when mounting rain gutters to the side of your roof, it is much preferable to use screws rather than the long wood nails. If you have ever seen gutters pulling away from a house, it is most likely due to the use of nails as a fastener.

There are instances however where nails are the appropriate choice over screws. One of those instances is when trim work needs to be attached. I use brads applied with a nail gun in that case.

The porch swings that we build are generally far superior to those of our competition. One of the main reasons is that all the fasteners are deck screws. Our porch swings will never separate due to the use of a nail instead of a screw.

I have repaired many wood fences for customers where the real reason for the failure was the use of cheap nails rather than deck screws. This is particularly true in the case of picket fences. When nails are used it is not a matter of if the picket will pull away, it is a matter of when.

We also use screws when installing drywall. We find that screws are far superior for us. We do not have to worry about marring up the drywall with  the hammer and it is much easier to make small adjustments in the level of the drywall (provided the leveling is done before taping and finishing). Screws also make it much easier to ensure that the drywall sheet is fastened tight against the studs. A countersunk screw is mush easier to tape and finish over than nails.

When you choose Moore Services for Your Money to do handyman work for you around your house, please rest assured that we will choose and use the best available fastener for the job at hand.

We will treat you in a manner in which we would like to be treated. This is called the Golden Rule and it is the cornerstone of our business.

Till Next Time

William Moore
Co-Owner and Founder
Moore Services for Your Money
mooresvs.com
678-702-4791


Monday, March 16, 2015

New Website

Hello-

I have wanted to obtain an Internet Domain Name for our business for a long time. I finally did that!

We now own the domain mooresvs.com . We have created a website that represents all of our service offerings at www.mooresvs.com.

I am also pleased to announce that my wife, the lovely and beautiful Shane, is now joining me full time in this business! She is expanding our cleaning services offering. In addition to commercial cleaning, we now also offer residential cleaning services!

We will continue to offer all of the other services that we have always offered. We will be doing business under the name of " Moore Services for Your Money". We have done this in an effort to better consolidate our service offerings in one place.

This blog will continue to operate to provide our customers and the community with information about Lawn Maintenance and Handyman topics in a blog format. I intend to update it more frequently in the future. Recent health issues have prevented me from updating the blog as often as I would have liked. I am feeling much better now!

We look forward to working with you soon!

Till Next Time
-William-

Monday, August 18, 2014

Installation of Fence Panels on a slope

A recent installation of panel fencing on a slope.
 We utilized the, so called, sloped method.
The panels here are 3ft. tall wood composite. 

Fence Panels on a Slope:

Image borrowed from Lowes.com
We occasionally install panel type fence material for customers. Recently, I have encountered some confusion regarding the installation of this type of fence on a site that has sloped ground. Therefore, I felt compelled to write this post in order to clarify the matter.

There are generally two methods that are utilized for the installation of panel picket fences on an incline (slope):


  • Parallel Method
The parallel method, requires that the fence run parallel to the slope. In order for this to work, the fence must be built to conform to the slope. This presents an issue for most pre-made panel fencing material. The issue is that the panels must be disassembled  and modified in order to make them conform to the slope.

This is difficult but possible with some materials such as treated wood panels. However, other materials present a greater difficulty rendering the parallel method of installation problematic to the point of impracticality.

For example, I have found that composite wood fence panels are very difficult, if not impossible, to disassemble. the issue is that, in most cases, the pickets are attached to the rails (sometimes called runners) with long countersunk staples. The pickets are usually very brittle. Because they are brittle and attached to the rails with staples, removing them without damage is very difficult. Excerpted pressure necessary to remove the pickets from the rails will most likely break or damage the pickets.



  •    Step Method



The step method requires that the fence panels be installed in such a fashion that they "step up " the slope. The panels are level but do not conform to the slope. This is, by far, the most common and generally preferred method of installing a panel type of picket fence on a sloped line.

There are limitations and trade-offs with most materials. In the case of pre-fabricated panels, the installation is less labor intensive but the panels are difficult, if not impossible to install on a slope using the parallel method.

If you do not find the aesthetics of the step method to be appealing and desire a parallel method installation on a slope, William Moore Lawn and Handyman Services very strongly recommends that you not use panels. It will be exponentially easier and ultimately more cost effective to construct the fence from individual pickets and to fabricate the rails at the jobs site.

I will be happy to answer any questions that you may have regarding this topic.

If you need a new fence and/or gate or if you have an existing fence or gate that  needs repairs please contact us at any time!

Till next time -


-William-

William Moore
Owner
William Moore Lawn and Handyman Services
678.702.4791
fayettelawnmoore@gmail.com

Sunday, July 20, 2014

Sometimes a simple repair is all that is needed.... that is fine with us!

Rodent damage to basement garage door

Patch installed on Garage door (before new weather strip was installed)
 A long time customer recently called me and asked me to repair a garage door in his basement.

Some sort of critter had chewed his way under the door. There was damage to part of the bottom door panel and the weatherstrip at the bottom of the door was chewed up.

The customer was interested in a patch rather than replacing the panel on the door. The door will likely be replaced at a later time.
Completed Repair
I used sheet metal to make a patch that will be more difficult for the next critter to chew through.

I also replaced the weather stripping along the bottom of the door. Once the door is repainted, the patch will blend in quite well.

We fixed the door, hopefully eliminated further damage by the critter and provided a much lower cost solution for the customer than replacing a panel or the entire door.

We always work with our customers to achieve the desired result as cost effectively as possible.
This does not mean that we are the cheapest guys in town but, we are the most dependable and we always treat our customers as we would like to be treated. This is our golden rule.

So, please contact us if you are in need of repairs around your home.

Till next time

-William

William Moore
Owner
William Moore Lawn and Handyman Services
fayettelawnmoore@gmail.com
678-702-4791


Wednesday, July 2, 2014

The Walking Dead Swing

Custom Swing
During filming of the AMC show "The Walking Dead", we were hired by a local construction company, All Span Builders, to fabricate and install a custom swing. The swing was used as part of a remodel of the entrance of Hollberg's furniture store in downtown Senoia, GA.

The entrance of the store was remodeled to be used in the production of "The Walking Dead".

The swing was built to custom specifications for the remodeling project.

We can customize a swing to your specifications as well.

Please contact us at anytime for additional information.

Thank You,

William Moore
William Moore Lawn and Handyman Services
fayettelawnmoore@gmail.com
678-702-4791

Friday, May 30, 2014

Regarding confidentiality of customer information, a message from the owner:



I thought it prudent to write about an issue that has been in my thoughts a lot lately.

Lowe's has recently partnered with Porch.com. Porch.com is a marketing service. The electronic service that they provide is intended to match homeowners that are looking for home improvement contractors with contractors in the area that can do the work. It is similar to Yelp.com.

I found some of their marketing material at the Lowe's contractor desk and decided to create a profile on Porch.com for the Handyman business.

I like some things about Porch.com. The contractor can put up pictures of projects and provide a lot of information on the type of services that they provide.

However, there is one thing for which my gut feel, so to speak, was not good at all:

Porch provides a mechanism for new homeowners to discover who has worked at the address of their home. Part of this information is obtained by Porch through public record searches (i.e. building permits, etc.) I do not really have a problem with this because this is public information and can be obtained by anyone. However, Porch, very strongly encourages contractors to give them lots of information about jobs they have done, Much of the information they request is customer information that I consider confidential. They want to know how much I charged a customer for a particular job (like the projects that I post). They want to know the exact street address of the job (supposedly for the address search feature I mentioned). They do not want the customer name ( if they have the other information, I maintain that the name is easy to obtain).

In his gospel, Luke records the words of Jesus, " Therefore all things whatsoever ye would that men should do to you, do ye even so to them: for this is the law and the prophets." Sometimes we call this the golden rule. Treat others the way you would want to be treated. Well, friends, I have to tell you, if I do business with you, I really do not want you telling strangers where I live and how much I paid you for the job. As the old folks that I grew up around used to say, "It just ain't none of their business".

It might be kind of cool to find out who, in the past, did work at a house I just bought. It might be cool to find out how much the previous owners paid for a repair. However, if they wanted me to know they would have told me. I could have asked before I bought the house. And, just because a particular contractor worked at an address in the past, does not really mean that this contractor will be a good choice for a future job. It does not even mean that the contractor did the work properly the first time.

A Porch representative contacted me by phone and very strongly suggested that I disclose this sort of information about my customers. I never intended to disclose any of this information. I have a very strong information security background from my previous career as a computer network security consultant, I was curious, so I asked for documentation detailing the internal controls, if any, that Porch implements to secure the potential vulnerability of this sensitive data. This should be in their internal data security policies and procedures. I was promised this information. What I got was names of contractors who have disclosed customer information to Porch. Porch wants me to contact these contractors for testimonials regarding how great it is to disclose sensitive customer information to a marketing company like Porch. Well.... No Thanks.

So, I strongly suggest that you, as a consumer, insist that personally identifiable information about your deal with your contractor remain confidential. I often use pictures and/or descriptions of the work that I do for customers as a marketing tool. Sometimes, I will give a broad description of the geographical area of the work, i.e. North Fayette County, GA.  However, I never disclose the customers name, address, nor any details of the deal (i.e. cost, time to complete, etc.) I am proud of my work but, your confidentiality is important to me as well!

Thanks for your continued business!  All of us at William Moore Lawn and Handyman Service appreciate your business and referrals!

-William Moore
Owner
William Moore Lawn and Handyman Services
678-702-4791
fayettelawnmoore@gmail.com